 |
Search Products |
|
|
|
|
Wastewater grinder |
|
|
|
 |
Solid waste recycling system |
|
|
|
|
Huanchuang (Xiamen) Technology Co.,Ltd
Phone: ：+86 592 5029670
Fax: +86 592 5029673
Email:info@hcwater.com
Add; 22 Guanri Road, Software Park 2, Xiamen, China
|
|
|
|
News |
|
|
| Comminutor harmless treatment equipment and waste water treatment system |
| Edited：HuanChuang technology Date：2014-12-8 17:30:05 |
|
|
|
Ring technology, garbage crusher manufacturers, a company through the introduction, digestion and absorption of innovation, developed with independent intellectual property rights of the garbage crusher.
Plant regeneration capacity reached 30 ~ 60 module, and the site of regeneration because many site conditions limit, garbage crusher production capacity is far below the daily processing capacity of regenerated plants, and the waste can not be recycled (or retirement) treatment catalyst in the field.
Garbage crusher on the other hand from the regeneration effect of regenerated plants, can according to the analysis of different catalyst poisoning, for cleaning and regeneration, the activation, often can meet or exceed the initial value; methods of chemistry and physics and catalyst regeneration process field, only the surface sediment load is simple and clear, the chemical activity of catalyst material, and then a certain amount of load level, can not be effectively recovered micropore SMOOTH OPERATOR, surface area of the catalyst cannot restore completely; therefore its activity can not be fully restored to the original level, new catalyst, deactivation rate is far greater than the regeneration of catalyst factory.
Plant regeneration process really is a complex physical and chemical process, chemical group catalyst regeneration catalyst regenerated plants after can be effectively controlled, for each customer, performance of the catalyst Recyclable 100%. But due to the strict control of the regeneration process of regenerated catalyst site, make live regeneration rate is very difficult to achieve the catalyst deactivation rate of new similar catalyst deactivation, and plant the actual use of mature technology and data regeneration in foreign countries, the inactivation rate and new catalysts are almost consistent.
The regeneration process of sewage treatment plant regeneration can not only produce the emission standard after, living garbage crusher and harmless treatment and recycling of waste catalyst, no two pollution.
Catalyst for exhaust gas purification of toxic substances, must guarantee the safety of personnel and appropriate environment, in order to prevent dust and potential chemical explosive material. Plant regeneration has a dedicated sewage treatment facilities, wastewater treatment are effective regeneration process can be in production, content in the discharged wastewater of arsenic and other heavy metals processing, far lower than the national standard of sewage comprehensive discharge limits.
Due to the heavy metal of harmless treatment equipment and waste water treatment system can not be built on the site of the site can be set only, recycling of sewage treatment equipment is simple, unable to produce harmless treatment contains large amounts of arsenic, vanadium, molybdenum, tungsten and other heavy metals catalyst cleaning process is effective, resulting in waste water, waste residue produced in the regeneration process. The process can meet the "integrated wastewater discharge standard" requirement, easy to plant the surrounding environment and water to form two pollution, ring technology garbage crusher is easy to produce greater health risks for power plant staff.
We have strict safety and control measures. But the scene regeneration is unable to meet the above requirements, have a greater risk of environmental pollution.
The effectiveness of the regenerated plants can strictly control the drying and roasting the environmental load, chemical activity, process and maintain the mechanical strength of the catalyst is very important. Due to the site . Due to the site conditions and the lack of effective temperature control equipment Co., large power, and therefore cannot be the catalysts were effective heat treatment, can easily lead to recovery of activity is not complete or the inactivation rate is added fast.
In general, the difference between the catalyst and regenerated plantlet regeneration after the scene is the necessary performance. Although the regeneration site may temporarily make some active recovery of the catalyst, but because there is no removal of toxic substances from the root, easily lead to restore vitality in a short period of time again, the initial deactivation. Plant regeneration is completely solve the defect site regeneration measures, the practice proved that, taking into account the mature markets such as the US, and China Tobacco plantlet regeneration method denitration catalyst regeneration proposal, healthy and rapid development, so as to promote the spent flue gas denitration catalyst regeneration of whole method, active material in the catalyst regeneration and the injection technology of vanadium containing. A compound liquid chemical high concentration of tungsten heavy metal ions such as regeneration, Plantlet Regeneration of strict control of renewable and liquid transportation use factory region; and now the field must use renewable liquid regeneration in power plants, transport and use of the existing security risk. The use of V2O5 and other chemical products recycling process of the catalyst, especially vanadium high temperature volatile strong, accompanied by regenerative steam cleaning liquid is easily absorbed by human body damage under high temperature, therefore in the regeneration and cleaning process, there must be |
| |
| >> Back |
|
|
